top of page



Technical Data Sheet

The 100% pure polyurea TECNOCOAT P-2049 system was developed as a two-component, sprayable, aromatic coating suitable for waterproofing, protection and sealing in general.

It's made up of two high reactive liquid components, isocyanates and amines, which are mixed together using specific spray equipment, to forman aromatic, continuous, seamless, high density, solid and elastic pure polyurea membrane, with high mechanical and chemical resistance qualities.

It has CE marking on the basis of a statement made DoP Declaration of Performance (DoP) conforms to the UE
305/2011 regulation. Declaration is available on demand.

For waterproofing and protection of:

  • ROOFING: Sloped and flat roofs (walkables), balconies and overhangs.(ETA 11/0357 "Liquid Applied Roof

  • Waterproofing Kit, based on pure Polyurea" and BBA 16/5340)

  • FLOORING: Car parks with heavy traffic, industrial floor surfaces with waterproofing and hard-wearing

  • requirements (according EN 1504.2); including an approved non-slip finish (ENV-12633:2003)

  • BRIDGE DECK: coating under asphal on concrete elements of civil engineering (ETE 16/0680 "Liquid Applied

  • Bridge Deck Waterproofing based on pure polyurea")

  • Tanks and irrigation canals, potable water contact (according BS-6920)

  • Retaining walls and foundations (EN 1504.2 "Products & systems for protection/repair of concrete structures")

  • Green roofs and walls (ETA 11/0357 Liquid Applied Roof Waterproofing Kit, and BBA 16/5340)

  • Power plants, recycling, waterwaste, water treatment and petrochemical plants (EN-1504.2)

  • Swimming pools, aquariums, lakes. Near sea water

  • Vehicle and boat coatings(bed liners)

  • Asbestos roofs rehabilitation (use with TECNOFOAM SPF)

  • As a protection for a SPF ( spray polyurethane foam TECNOFOAM G-2050)

NOTE: call our technical department about the application to other supports or situations

bottom of page